Description
Laboratory Laminator Models for Tandem Solar Cells(Perovskite /HJT) module is suitable for small batch and multi-specification order production, especially for customized modules or R&D trial production stage.
Thanks to faster heating speed and less power consuption, it accepts by majority of solar module manufacturer or schools.
The lamination dimension with electric heating:400*500mm,400*400mm,500*500mm,700*700mm,customized dimension is available.
|
Model |
AZ-0405 | Laminate Length * Width | 400mm x 500mm
|
|
Dimension |
700×800×1100mm | Weight |
400kg
|
|
Power supply |
380V 3 phase | Peak power |
3 Kw
|
|
Pumping speed |
8L/S | Work power |
1.5 Kw
|
|
Control mode |
Automatic/ Manual | Ultimate vacuum |
20 Pa
|
|
Heating mode |
Electrical heating system | Temperature control mode |
PID Control |
|
Maximum temperature |
180℃ | Temperature uniformity |
±3℃ Multi-point temperature control
|
|
Work temperature |
100℃～160℃ | Controllable temperature precise |
≤±3℃ (at the regulated set temperature value
|
|
Unevenness of the worktable |
Unevenness≤300 μm/m² | Air discharge speed |
Can adjust continuously within 0～50L/S
|
|
Press of compressed air |
0.5～0.8MPa | Laminate time |
about 15min. |
|
Pumping time |
4～5min | Compressed air speed |
1-8L/S |
|
Work vacuum degree |
80～20Pa | Ambient temperature |
0～50℃
|
|
Note: Customized specifications are available upon your requirements. |
|||
Various Solar Cell Laminator Model No.
Reviews
There are no reviews yet.