Description
Application Field
This equipment is used to automatically weld solar cells with 5,6,9,10,11,12 to 20 grid lines in series according to the set parameters into a solar stringer.
Teflon conveyor belt transmission mechanism;Flux circulation immersion supply.
Automatic film supply positioning and tape pulling.
Adopting infrared welding method.
| Model | AZCH-1800 |
| Basic information | |
| Soldering speed | 1400-1500P/Hour |
| Breakage ratio | ≤2‰(Based on A grade cells without secondary sorting) |
| Contact error | ≤0.2mm(Based on A grade cells without secondary sorting) |
| Operation control | PLC |
| Soldering way | IR |
| Basket qty | 4Pieces(recommend 100P cell/pieces) |
| Aligning control | Ribbon conveyor&Welding mechanism calibration |
| Cell parameter | |
| Applicable Cells | 26~156*156mm;30~166*166mm;30~182*182mm;30~182*210mm |
| Cell thickness | ≥160μm |
| Ribbon parameter | |
| Applicable Ribbons
|
Thickness:120μm~250μm;Width:0.6~1.6mm
With lead or without lead |
| Applicable Flux | No-clean flux, without halogen element |
| Stringer parameter | |
| Stringer length | 2000mm/stringer(negotiate if more than it in advance) |
| Bus bar qty | 5、6、9、10、11、12~20BB |
| Distance of cells | 1.0~5.0mm±0.2mm(adjustable) |
| Electric Specification | |
| Peak power | 18kw |
| Average power | 12kw |
| Power | AC380V 50Hz 3phase 5wire |
| Air compressed | ≥0.6Mpa Flow ≥60L/mins |
| Operation Temperature | 23±7℃（recommend） |
Reviews
There are no reviews yet.