Description
Electric heated solar panel laminator is most important machine to test new material for future technology of industry.
Thanks to faster heating speed and less power consuption, it accepts by majority of solar module manufacturer or schools.
The lamination dimension with electric heating:400*500mm,400*400mm,500*500mm,700*700mm.
Our laminators use high quality vacuum pumps.the brand of vacuum pump is from Busch, so vacuuming speed is fast and vacuum levels is higher. The temperature uniformity is very good, produced solar modules has no air bubbles.the EVA adhesive has high viscosity, so the solar panel usefull life is relatively long.
|
Model |
AZ-0505 | Laminate Length * Width | 500mm x500mm
|
|
Dimension |
900×980×1100mm | Weight |
600kg
|
|
Power supply |
380V 3 phase | Peak power |
12Kw
|
|
Pumping speed |
8L/S | Work power |
7Kw
|
|
Control mode |
Automatic/ Manual | Ultimate vacuum |
20 Pa
|
|
Heating mode |
Electrical heating system | Temperature control mode |
PID Control |
|
Maximum temperature |
180℃ | Temperature uniformity |
±3℃ Multi-point temperature control
|
|
Work temperature |
100℃～160℃ | Controllable temperature precise |
≤±3℃ (at the regulated set temperature value
|
|
Unevenness of the worktable |
Unevenness≤300 μm/m² | Air discharge speed |
Can adjust continuously within 0～50L/S
|
|
Press of compressed air |
0.5～0.8MPa | Laminate time |
about 15min. |
|
Pumping time |
4～5min | Compressed air speed |
1-8L/S |
|
Work vacuum degree |
80～20Pa | Ambient temperature |
0～50℃
|
|
Note: Customized specifications are available upon your requirements. |
|||
Reviews
There are no reviews yet.