Description
Lab Scale Solar Panel Laminator is most important machine to test new material for future technology of industry with electric heating.
Thanks to faster heating speed and less power consuption, it accepts by majority of solar module manufacturer or schools.
The lamination dimension with electric heating:400*500mm,400*400mm,500*500mm,700*700mm,customized dimension is available.
The principle of solar panel laminator is to exert a certain pressure on the surface of each layer of material in the component,and press these substances tightly together under the state of heating.It is an important equipment for photovoltaic module manufacturing.
Advantage of electric heating solar panel laminator:
1.Pneumatic back-opening lifting mode,equipped with safety lock,stable and reliable structure;
2.Flexible working mode,manual and automatic adjustment;
3.Suitable for module repair and production of various small module;
|
Model |
AZ-0405 | Laminate Length * Width | 400mm x 500mm
|
|
Dimension |
700×800×1100mm | Weight |
400kg
|
|
Power supply |
380V 3 phase | Peak power |
3 Kw
|
|
Pumping speed |
8L/S | Work power |
1.5 Kw
|
|
Control mode |
Automatic/ Manual | Ultimate vacuum |
20 Pa
|
|
Heating mode |
Electrical heating system | Temperature control mode |
PID Control |
|
Maximum temperature |
180℃ | Temperature uniformity |
±3℃ Multi-point temperature control
|
|
Work temperature |
100℃～160℃ | Controllable temperature precise |
≤±3℃ (at the regulated set temperature value
|
|
Unevenness of the worktable |
Unevenness≤300 μm/m² | Air discharge speed |
Can adjust continuously within 0～50L/S
|
|
Press of compressed air |
0.5～0.8MPa | Laminate time |
about 15min. |
|
Pumping time |
4～5min | Compressed air speed |
1-8L/S |
|
Work vacuum degree |
80～20Pa | Ambient temperature |
0～50℃
|
|
Note: Customized specifications are available upon your requirements. |
|||
Aozeesolar’s Solar Module Laminator Model No.
Reviews
There are no reviews yet.